Progressive Hardware Co., Inc
ESCUTCHEONS
2000 Series
Traditional 7" x 2-1/4" solid brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#2000/26 - Polished Chrome
#2001/3 Polished Brass
2002/4 Satin brass
#2003/3 Polished Brass
#2004/3 Polished Brass
#2000 - Knob bearing & key slot                12 per box
#2001 - Knob bearing only                       12 per box
#2002 - Knob bearing & cylinder hole         12 per box
#2003 - Knob bearing & turn piece              6 per box
#2004 - Push plate                                   12 per box


This plate is available in the following finishes:
US10 - Satin Bronze
US26 - Polished Chrome
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass


This plate is meant to work with our #2600 or #2400 door knob, which can be found on the navigation bar on the side of the page.

 
BRASS KNOB FERRULE & BACK-WASHERS for DIY
Solid Brass Stamped Ferrule and Steel Back-washer for do-it-yourself repair. Requires a 5/8" hole in the escutcheon. Will accept up to a 5/8" diameter knob shank end, such as our #2600 knob.

Available in bright brass and Bright Chrome. Packed 10 sets per bag

KF-1/3  -  Bright Brass
KF-1/26  -  Polished Chrome
2020 Series
Traditional 10" x 2-3/4" solid brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#2021/3 Polished Brass
#2022/26 Polished Chrome
#2023/26D Satin Chrome
#2024/3 Polished Brass
#2021 - Knob bearing only                       12 per box
#2022 - Knob bearing & cylinder hole       12 per box
#2023 - Knob bearing & turn piece             6 per box
#2024 - Push plate                                   12 per box

This plate is available in the following finishes:
US10 - Satin Bronze
US26 - Polished Chrome
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass

This plate is meant to work with our #2600 or #2400 door knob, which can be found on the navigation bar on the side of the page.
3000 Series
Russwin/Corbin 9" x 2-1/2" Solid Brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#3001/3 Satin Brass
#3002/3 Polished Brass
#3003/26D Satin Chrome

#3001 - Knob bearing only                    12 per box
#3002 - Knob bearing & cylinder hole    12 per box
#3003 - Knob bearing & turn piece          6 per box              

The knob hub on these plates is a bit larger than usual to accommodate original Russwin knobs. The inside diameter of this hub is 3/4" and will also work properly with our #3600 door knob, which can be found on the navigation bar on the side of the page.


This plate is available in the following finishes:
US10 - Satin Bronze
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass
The Chelsea
10" Escutcheon     DISCONTINUED
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#6000/3 Polished Brass
#6001/3 Polished Brass
#6002/3 Polished Brass
#6003/3 Polished Brass
#6004/3 Polished Brass
#6000 - Knob bearing & key slot                  12 per box
#6001 - Knob bearing only                           12 per box
#6002 - Knob bearing & cylinder hole          12 per box
#6003 - Knob bearing and turn piece             6 per box
#6004 - Push plate

This plate is meant to work with our #2600 or #2400 door knob, which can be found on the navigation bar on the side of the page.

Available in:
US26 - Polished Chrome
US3 - Polished Brass
The GOTHAM
7-1/2" Escutcheon   DISCONTINUED
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#5000/3 Polished Brass
#5001/3 Polished Brass
#5003/3 Polished Brass
#5000 - Knob bearing & key slot             12 per box
#5001 - Knob bearing only                      12 per box
#5003 - Knob bearing & turn  piece           6 per box

This plate is meant to work with our #2600 or #2400 door knob, which can be found on the navigation bar on the side of the page.

Available in:
US26 - Polished Chrome
US3 - Polished Brass
M Series
Marks USA   7" and 10" Escutcheons
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#M2001/3 Polished Brass
#M2003/3 Polished Brass
#M2021/3 Polished Brass
#M2022/3 Polished Brass
#M2023/3 Polished Brass
#M2024/3 Polished Brass
#M2001 - 7" x 2-1/4", knob bearing only, replaces Marks #A-9261                            12 per box

#M2003 - 7" x 2-1/4", knob bearing & turn piece, replaces Marks #A-9262               6 per box

#M2021 - 10" x 2-3/4", knob bearing only, replaces Marks #A9280                              12 per box

#M2022 - 10" x 2-3/4", knob bearing & cylinder hole, replaces Marks #A9281               12 per box

#M2023 - 10" x 2-3/4", knob bearing & turn piece, Replaces Marks #A9282                6 per box

#M2024 - 10" x 2-3/4", push plate, replaces Marks #A9283                                          12 per box

This plate has a nylon knob bearing with an inside diameter of .675", suitable for Marks knob #92522 or our #M2600 door knob.

Available in:
US26D - Satin Chrome
US3 - Polished Brass
The Marlborough
7-1/2" x 2-1/4" escutcheon - Solid Brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#4001/26D Satin Chrome
#4002/3 Polished Brass
#4003/26D Satin Chrome
#4001 - Knob bearing only                          12 per box
#4002 - Knob bearing & cylinder hole          12 per box
#4003 - Knob bearing & turn piece                6 per box

The knob hub on these plates is a bit larger than usual to accommodate original Russwin knobs. The inside diameter of this hub is 3/4" and will also work properly with our #3600 door knob, which can be found on the navigation bar on the side of the page.


This plate is available in the following finishes:
US10 - Satin Bronze
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass
Corbin/Russwin "N" escutcheon
7-1/2" x 2-1/4" solid brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
CR4001/26D Satin Chrome
CR4002/26D Satin Chrome
CR4003/3 Polished brass
CR4004/3 Polished brass
CR4005/26D Satin Chrome
CR4006/3 Polished brass
#CR4001 - Knob bearing only                       12 per box
#CR4002 - Knob bearing & cylinder hole       12 per box #CR4003 - Knob bearing & turn piece             6 per box #CR4004 - Push plate                                   12 per box
#CR4005 - Cylinder hole only                       12 per box
#CR4006 - Turn piece only                            12 per box

This plate is available in the following finishes:
US10 - Satin Bronze
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass
Specialty Period Trim
Solid Brass
Document
Click here for escutcheon dimensions
Photo Album Gallery Place Holder - Please wait while the Photo Album loads. If the album does not show, please refresh the page to try again.
#2031/26 Pollished chrome
#2031LF/3 Polished brass
#2032/26D Satin chrome
#2040/3 Polished brass
#2031 - Classic 2-1/4" square bevel plate is made of solid brass with wrought brass knob ferral. Ferral is 1/8" deep x .650 I.D. with steel back re-enforcement . Use with #2600 door knob.  12 per box

#2031LF - The same classic plate as above but knob ferral is made  of turned bar brass and is .300" deep and .750 I.D. Use with our #3600 door knob.      12 per box

#2032 -The same classic 2-1/4" square plate but pierced for     a cylinder, hole is 1-1/4" diameter.  12 per box

#2040 - Turn of the century reproduction key hole plate. 2" x 1-1/8", sharp details with bit key hole.  12 per box


This plate is available in the following finishes:
US26 - Polished chrome
US26D - Satin Chrome
US3 - Polished Brass
Turn Knobs for mortise locks
Document
click here for dimensions
click on any image to enlarge
#76/3 Polished brass
#77/3 Polished brass
#70/BP Brass plated
#75/26 Polished chrome
#70 - Turn only with clip, for DYI jobs. Fits into 3/8" hole. Available finishes: US3, US26, US26D            12 each per box

#75 - Solid brass oval plate with bit key hole, packed in pairs. Available finishes: US3, US26D, US26.             6 pair per box

#76 - Solid brass oval plate with turn. Available finishes: US3, US26, US26D                                               12 each per box

#77 - Solid brass round plate with turn. Available finishes: US3, US26, US26D                                               12 each per box


ROSETTES - Solid Brass
Document
click here for rose dimensions
3" - 2-1/2" - 2-1/4" - 2"
#205 - 2" rose                        12 pair per box
#206 - 2-1/4" rose                  12 pair per box
#207 - 3-1/2" rose                  12 pair per box
#208 - 3" rose                        12 pair per box

This rose is available in the following finishes:
US10 - Satin Bronze
US26 - Polished Chrome
US26D - Satin Chrome
US3 - Polished Brass
US4 - Satin Brass
63 Brightside Ave. East Northport, NY 11731  631-757-8866